Brning With Old Cd Burner And Old Version Of Roxio

[john7]

i recently baught a cd burner and aquired a full version of roxio easy cd creater 5.
i often get error messages when using cd-r s
the error messages are

E80041882: CD error - power calibration area error - [03/73/03]
E80041899: Write error - buffer underrun occurred - [06/C5/00]
E80041925: TrackWriter error - Command retry failed - [T7118]

i have successfully burned using the exact same brand of disk and cd-wr drive and software
i also have the same problem with older cd-rw disk, but new one's work fine

the directCD feature only works on occasion as well

[locustfurnace]

Check with the manufacturer on what blanks the drive supports. Not all blank media works with all hardware. I have seen the power calibration error on blanks my drives did not support. Since I have gone through 3 different drives, I've had to shuffle around the blanks I used to different ones when buying a new drive.
If the older CD recorder worked fine with the blanks, and you got a new drive, and it no longer burns to those disks, it could be that the CD-rw's were slow 1-4x speed medium, and the new drive is a HighSpeed CD-rw. Which requires capable blanks.
My 2x blank CD-rw's worked fine in my 2x drive, but never worked in my 10x or 24x CD-RW drives.
Buy some supported media, and see if that solves your problem

[bunny]

most likely roxio go for a diffrent burning app to check ya drive performence that way.

[sexybooty]

some help me down load kazaalite try ain't workin

[Guest]

Originally posted by sexybooty@May 14 2004, 12:45 PM
some help me down load kazaalite try ain't workin
whats this got to do with this request? post proply or not at all